Easy Instant Pot tomato ribs (low-carb) are pork ribs simmered in a rich sauce of burst cherry tomatoes and sweet sun-dried tomatoes. Twenty minutes of pressure cooking gives you meat that slips off the bone, while butter, thyme, and oregano make the sauce taste slow-simmered. It's a Sunday-project dinner on a weeknight clock.
Craving comfort food that’s both incredibly delicious and ridiculously easy to make? Look no further! These Instant Pot Tomato Ribs are your answer. We’re talking fall-off-the-bone tender pork, bathed in a rich and savory sauce bursting with the bright flavor of cherry tomatoes and the intense sweetness of sun-dried tomatoes. The Instant Pot does all the heavy lifting, pressure cooking the ribs to perfection in just 20 minutes, while a quick sauté develops a luscious, aromatic sauce. It’s a perfect, low-carb weeknight dinner that tastes like you spent hours in the kitchen!
Ingredients
• (Total Time: 45 MIN| Serves: 6)
• 2 lbs / 900g (31.7 oz) pork ribs, chopped into individual pieces
• 4 cups / 950ml beef broth
• 4 tbsp / 60g (2.12 oz) butter
• 1 large onion, finely chopped
• 2 cups / 300g (10.6 oz) cherry tomatoes, whole
• 1 cup / 55g (1.94 oz) sun-dried tomatoes
• Spices
• 3 tbsp stevia or swerve
• 1 tsp / 6g (0.21 oz) sea salt
• 1 tsp / 1g (0.04 oz) dried thyme
• ½ tsp / 0.5g (0.02 oz) dried oregano
• ½ tsp / 1.5g (0.05 oz) garlic powder
Instructions
1. Directions
2. Place the chopped pork ribs into the Instant Pot insert and pour in all 4 cups (960 ml) of the beef broth. Secure the lid, set the steam release handle to the ‘Sealing’ position, and select the ‘Manual’ or ‘Pressure Cook’ button.
3. Set the timer for 20 minutes on high pressure.
4. Once the cooking cycle is complete, allow the pressure to release naturally for 10 minutes, then carefully perform a quick release for any remaining steam. Open the lid.
5. Using tongs, remove the tender ribs from the pot and set them aside. Carefully pour the broth into a separate bowl or container. Select the ‘Sauté’ function on the Instant Pot.
6. Add the butter to the inner pot. Once melted, add the finely chopped onion and a pinch of salt. Cook for 3-4 minutes, stirring until the onion is soft and translucent.
7. Add the whole cherry tomatoes and sun-dried tomatoes to the pot. Pour in 2 cups (480 ml) of the reserved beef broth and stir in the stevia (or swerve), remaining sea salt, dried thyme, dried oregano, and garlic powder.
8. Continue to cook on ‘Sauté’ mode, stirring occasionally, for 5-7 minutes until the cherry tomatoes have softened and started to burst, creating a rich sauce.
9. Press the ‘Cancel’ button to turn off the heat. Return the cooked ribs to the pot, gently tossing to coat them completely in the savory tomato sauce.
10. Cover the pot with the lid (no need to seal) and let the ribs rest in the warm sauce for 10 minutes to allow the flavors to meld together before serving.
Nutritional Information
• Per Serving
• Calories: 532
• Total Fats: 35.6g (1.26 oz)
• Net Carbs: 4.9g (0.17 oz)
• Protein: 44.4g
• Fiber: 1.6g
Pro Tips for Success
• For an extra layer of flavor, use the ‘Sauté’ function to brown the ribs in a little oil on all sides before pressure cooking. Remove them, deglaze the pot with a splash of broth, then proceed with the recipe.
• If you prefer a thicker sauce, create a slurry by mixing 1 teaspoon of xanthan gum with 1 tablespoon (15 ml / 0.5 fl oz) of cold water. Whisk it into the sauce on ‘Sauté’ mode until it reaches your desired consistency.
• For a deeper, more concentrated tomato flavor, use sun-dried tomatoes packed in oil. Just be sure to drain them well before adding them to the pot.
• These ribs are fantastic served over cauliflower rice, zucchini noodles, or with a side of steamed green beans to keep the meal low-carb and satisfying.
FAQ
Q: How can I get extra flavor on my ribs
A: For an extra layer of flavor, use the ‘Sauté’ function to brown the ribs in a little oil on all sides before you begin pressure cooking. This step helps to create a deeper, more savory taste.
Q: What if my tomato sauce is too thin
A: If you prefer a thicker sauce, you can easily create a slurry by mixing 1 teaspoon of xanthan gum with 1 tablespoon (15 ml / 0.5 fl oz) of cold water. Whisk this mixture into the sauce on ‘Sauté’ mode until it thickens to your liking.
Q: What can I serve with these low-carb ribs
A: To keep the meal low-carb and satisfying, these ribs are fantastic served over cauliflower rice, zucchini noodles, or with a side of steamed green beans.
Q: Can I make these ribs ahead of time
A: Yes, these ribs are perfect for meal prep. The flavors will meld and become even more delicious overnight. Store them in an airtight container in the refrigerator for up to 4 days and reheat gently before serving.
Pro Tips for Success
- Brown the ribs on the 'Sauté' function in a little oil before pressure cooking, then deglaze with a splash of broth — it deepens the tomato sauce noticeably.
- Use sun-dried tomatoes packed in oil (drained well) for a more concentrated tomato flavor than the dry-packed kind.
- For a thicker sauce, whisk a slurry of 1 teaspoon xanthan gum mixed with 1 tablespoon cold water into the simmering sauce — it thickens without the carbs of flour.
- You use only 2 cups of the reserved beef broth in the sauce, so freeze the rest; it's the perfect braising liquid for your next batch of ribs.
- These ribs taste even better the next day — refrigerate up to 4 days and rewarm covered so the sauce doesn't reduce too far.
Frequently Asked Questions
Can I make these tomato ribs ahead of time?
Yes — the flavors meld overnight, which makes them ideal for meal prep. Store them in an airtight container in the fridge for up to 4 days and reheat gently before serving.
What should I serve with these low-carb ribs?
Cauliflower rice, zucchini noodles, or steamed green beans all soak up the tomato sauce without loading the plate with carbs.
How do I thicken the tomato sauce?
Simmer it on 'Sauté' a few minutes longer, or whisk in a slurry of 1 teaspoon xanthan gum mixed with 1 tablespoon cold water until the sauce coats the ribs.
Can I cook these ribs from frozen?
You can, but add about 5-10 minutes to the 20-minute pressure cycle and plan for a full natural release before opening the lid.
Recipe card below.

Easy Instant Pot Tomato Ribs (Low-Carb)
Ingredients
Method
- Directions
- Place the chopped pork ribs into the Instant Pot insert and pour in all 4 cups (960 ml) of the beef broth. Secure the lid, set the steam release handle to the 'Sealing' position, and select the 'Manual' or 'Pressure Cook' button.
- Set the timer for 20 minutes on high pressure.
- Once the cooking cycle is complete, allow the pressure to release naturally for 10 minutes, then carefully perform a quick release for any remaining steam. Open the lid.
- Using tongs, remove the tender ribs from the pot and set them aside. Carefully pour the broth into a separate bowl or container. Select the 'Sauté' function on the Instant Pot.
- Add the butter to the inner pot.
- Once melted, add the finely chopped onion and a pinch of salt.
- Cook for 3-4 minutes, stirring until the onion is soft and translucent.
- Add the whole cherry tomatoes and sun-dried tomatoes to the pot.
- Pour in 2 cups (480 ml) of the reserved beef broth and stir in the stevia (or swerve), remaining sea salt, dried thyme, dried oregano, and garlic powder.
- Continue to cook on 'Sauté' mode, stirring occasionally, for 5-7 minutes until the cherry tomatoes have softened and started to burst, creating a rich sauce.
- Press the 'Cancel' button to turn off the heat. Return the cooked ribs to the pot, gently tossing to coat them completely in the savory tomato sauce.
- Cover the pot with the lid (no need to seal) and let the ribs rest in the warm sauce for 10 minutes to allow the flavors to meld together before serving.


