30-minute pressure cooker pork ribs with vegetable sauce get fall-off-the-bone meat on the table fast. The ribs cook first, then finish in a rich broth built with cauliflower, red peppers, portobello mushrooms, and tomatoes. It's a true all-in-one keto dinner that lands at about 7 g net carbs per serving.
Forget waiting hours for tender, succulent pork ribs! Thanks to the magic of the pressure cooker, you can have fall-off-the-bone ribs, swimming in a rich and savory vegetable-packed sauce, on your table in just 30 minutes. This all-in-one meal is perfect for a busy weeknight when you’re craving serious comfort food without the fuss. Let’s get cooking!
Ingredients
• 2 lbs / 900g (31.7 oz) pork ribs
• 1 cup / 100g (3.5 oz) cauliflower, chopped into florets
• 2 celery stalks, chopped
• 2 red bell peppers, chopped
• ½ cup / 75g (2.65 oz) onions, finely chopped
• 1 cup / 75g (2.65 oz) portobello mushrooms, chopped
• 1 cup / 180g (6.3 oz) tomatoes, diced
• 5 cups / 1.2 L beef broth
• 3 tbsp / 42g (1.48 oz) butter
• 2 tbsp / 30ml sugar-free hot chili sauce
• 1 tsp / 5ml apple cider vinegar
• 2 garlic cloves, whole
• 2 tsp / 12g (0.42 oz) salt
• ½ tsp / 1g (0.04 oz) black pepper, freshly ground
• 1 tsp / 1g (0.04 oz) dried celery
• 2 tsp / 6g (0.21 oz) onion powder
Instructions
1. Directions
2. Place the pork ribs and chopped celery stalks into your pressure cooker pot. Pour in just enough water to cover the ribs.
3. Secure the lid, set the steam release to the “Sealing” position, and cook on high pressure for 15 minutes using the “Meat” setting or manual high pressure.
4. Once the timer finishes, perform a quick pressure release by carefully turning the steam release handle to the “Venting” position. Once the pin drops, open the lid.
5. Carefully drain the water. Add the butter, cauliflower, bell peppers, onions, mushrooms, tomatoes, whole garlic cloves, beef broth, hot chili sauce, and apple cider vinegar to the pot with the ribs.
6. Sprinkle the salt, black pepper, dried celery, and onion powder over everything. Stir gently to combine all the .
7. Secure the lid again and set the steam release to “Sealing”. Cook on high pressure for an additional 7 minutes.
8. When the time is up, perform another quick pressure release. Open the lid, give everything a final stir, and serve immediately.
Nutritional Information
• Nutrition Per Serving
• Calories: 633
• Total Fats: 40.7g (1.44 oz)
• Net Carbs: 7.1g (0.25 oz)
• Protein: 54.9g
• Fiber: 2.1g
Pro Tips for Success
• For a richer flavor, use your pressure cooker’s “Sauté” function to brown the ribs in a little oil on all sides before the first pressure cook.
• To create a thicker, glaze-like sauce, remove the ribs and vegetables after cooking and turn on the “Sauté” function. Let the remaining liquid simmer and reduce for 5-10 minutes.
• For a classic BBQ finish, place the cooked ribs on a baking sheet, brush with your favorite BBQ sauce, and broil for 2-4 minutes until the sauce is bubbly and caramelized.
• Don’t overcrowd the pot. Ensure the do not go past the max-fill line on your pressure cooker for safe and effective cooking.
FAQ
Q: How long does it take to cook pork ribs in a pressure cooker
A: This recipe makes tender, fall-off-the-bone pork ribs in a total pressure cooking time of just 22 minutes. The entire meal, including the vegetable-packed sauce, is ready in about 30 minutes from start to finish.
Q: Can I make these pressure cooker ribs with a BBQ sauce finish
A: Absolutely! For a classic BBQ finish, after pressure cooking, place the ribs on a baking sheet. Brush them with your favorite BBQ sauce and broil for 2-4 minutes until the sauce is bubbly and caramelized for that perfect sticky glaze.
Q: How do I get a thicker sauce for my ribs
A: To create a thicker, glaze-like sauce, simply remove the cooked ribs and vegetables from the pressure cooker. Set the appliance to the ‘Sauté’ function and let the remaining liquid simmer and reduce for 5-10 minutes until it reaches your desired consistency.
Q: Is this a low-carb or keto-friendly rib recipe
A: Yes, with only 7.1g (0.25 oz) of net carbs per serving, this pressure cooker pork rib recipe is a great option for a low-carb or keto diet. The sauce is packed with low-carb vegetables and uses a sugar-free hot chili sauce to keep the carb count down.
Pro Tips for Success
- Brown the ribs in a little oil on the 'Sauté' function before the first pressure cook for a richer, deeper flavor in the finished sauce.
- Don't let the ingredients go past the max-fill line on your pressure cooker. Overfilling is a safety issue and keeps the ribs from cooking evenly.
- For a thicker, glaze-like sauce, lift out the ribs and vegetables after cooking and let the remaining liquid simmer and reduce on 'Sauté' for 5-10 minutes.
- Use sugar-free hot chili sauce to keep the recipe keto; regular chili sauce adds a surprising amount of sugar to the pot.
- For a classic BBQ finish, brush the cooked ribs with your favorite low-carb BBQ sauce and broil for 2-4 minutes until bubbly and caramelized.
Frequently Asked Questions
Are these pressure cooker pork ribs keto-friendly?
Yes, with about 7.1 g net carbs and 54.9 g protein per serving. The key is using sugar-free hot chili sauce and skipping any sugary BBQ glaze.
Can I make these pork ribs ahead of time?
Certainly. Cook them fully, refrigerate for up to 3 days, and reheat gently in the sauce or under the broiler. The flavors deepen nicely overnight.
Can I use beef ribs instead of pork ribs?
Beef ribs work with the same two-stage pressure cooking, though they may need a few extra minutes in the first cook. The vegetable sauce suits them just as well.
Can I freeze these ribs and vegetable sauce?
Yes, it freezes well for up to 2 months. Cool everything completely, store the ribs submerged in sauce, and thaw overnight in the fridge before reheating.
Recipe card below.

30-Minute Pressure Cooker Pork Ribs with Vegetable Sauce
Ingredients
Method
- Directions
- Place the pork ribs and chopped celery stalks into your pressure cooker pot.
- Pour in just enough water to cover the ribs.
- Secure the lid, set the steam release to the “Sealing” position, and cook on high pressure for 15 minutes using the “Meat” setting or manual high pressure.
- Once the timer finishes, perform a quick pressure release by carefully turning the steam release handle to the “Venting” position.
- Once the pin drops, open the lid.
- Carefully drain the water.
- Add the butter, cauliflower, bell peppers, onions, mushrooms, tomatoes, whole garlic cloves, beef broth, hot chili sauce, and apple cider vinegar to the pot with the ribs.
- Sprinkle the salt, black pepper, dried celery, and onion powder over everything.
- Stir gently to combine all the .
- Secure the lid again and set the steam release to “Sealing”.
- Cook on high pressure for an additional 7 minutes.
- When the time is up, perform another quick pressure release. Open the lid, give everything a final stir, and serve immediately.
- Don't overcrowd the pot. Ensure the do not go past the max-fill line on your pressure cooker for safe and effective cooking.


